www.DiscGolfersR.Us

The Community of Disc Golfers and About All Things Disc Golf

I have had it for 3 months. I switch between my starter bag and that. Switched again today. It gets me so mad not having dividers for my disc. All my disc all fallen by hole 5. I want a Carolina bag, but I told the wife I would wait till Christmas. Would the revolution roller cage work for the fade tourney or would it not fit for my bag. Thanks for any suggestions.

Views: 21

Reply to This

Replies to This Discussion

I built my own frame and it was fairly easy. If you're handy, you can do it. I used

2 - 13.5" long 1/2" PVC irrigation pipe
2 - 13.5" long 3/4" PVC irrigation pipe
2 - 1/2" irrigation end plugs
2 - 3/4" irrigation end plugs

I wanted a center pocket for my towels and miscellaneous stuff so I cut
4 - 6" x 10.5" sheets of 1/4" plexiglass. You only NEED two, one for each end.

After I rounded the corners and edges of my plexiglass I drilled the holes for the pipes.

The 3/4 holes are on the bottom about a 1/4" from the edge and 2" off center.
The 1/2 holes are at the top corners and about a 1/4" from the top and side.
For the end plexiglass sheets these holes are the diameter of the inside of the pipe so the plexiglass fits in between the end of the plug and the pipe.

I love this frame. I can hold 5 midrange and 6 drivers and have the two inch center divide. Without putting the divde I could probably fit 15 or 16 discs. I also mad the width in between the two top pipes slightly smaller than my discs diameter so when my bag rolls over, all my discs are held in place.
Do you have a pic of your work? I wouldnt mind building one but dont quite understand. I work better when i have a pic.
would'nt you need 4 of each of the plugs, two for each section of pipe?
I heard not to put the roller cage in the revolution bag because it takes up too much space, maybe you need more discs for your tour bag.
Yes 4 ea. of the plugs. Thank you Kent

Reply to Discussion

RSS

Blog Posts

State of Disc Golf: Disc Golf Growth

Posted by Alan Barker on January 29, 2014 at 2:26pm

What are your favorite Disc Plastics?

Posted by Alan Barker on November 4, 2013 at 1:38pm

2 Tips For Guys To Entice A Girls

Posted by Frederick Cranford on September 11, 2013 at 5:42am

Disc Golf Answerman Episode 6

Posted by CoolDaddySlickBreeze on August 13, 2013 at 4:40pm

Prodigy Fairway Drivers

Posted by Alan Barker on July 8, 2013 at 5:30pm

Badge

Loading…
 

© 2014   Created by Terry "the Pirate" Calhoun.

Badges  |  Report an Issue  |  Terms of Service

SF00401968