over stable or just stable

I've got a elite x buzzz that is super dommy and a cryztal buzzz that is just about as flat as can be. Which one will be more stable

[Peter Kunoff]

my money is on the domey x buzz...until it hits enough trees........that is if you get equal snap, nose angle,etc.....IMO domey buzz equals harder low speed fade.....that said if the tops were equally flat the crystal would normally be more stable....

[A.I.]

Stability is overrated yo, PH levels determines all aspects of flight path.




ok I couldn't just say that without saying jk...

[Roy]

Funny how my disc flys seems to depend on my THC level, lol.

Generally Z's are more stable then X's for most models, domey should effect the glide more the the overstablity. The stablity is based on much more on the higher up the edge of rim is the more overstable something is, the lower the rim the less overstable it is.

You learn this when learning about tuning discs...

[Lasse Jansson]

You got them... Try.

[Eric Ritchie]

I'm going to go with the flat top crystal. The first run buzzz' had very flat flight plates, and are well known for being the most stable buzzz.

[4U2NV]

crystal will be more stable.

[Pete-ROC]

I have a black limited edition buzz and glass blowers open buzzz i got as a gift and the black one is flat as can be and also stable as can be. the other one has a slight dome and is slightly over stable.

[4U2NV]

Crystal and Z plastic have a tendency to be more overstable and hold their stability longer then Elite-x Buzzz.

1 good crank with an Elite-X buzzz into a tree and it is now -.5 stability
100 good cranks into a tree with Crystal Z buzzz it still has .3 stability

[JeremyRogers]

it could go either way given the different plastics , Ive seen flat ones be very stable, no matter what its prolly gonna fly stable , and just go ahead and start beating that other one cuz its gonna get flippy

[Yeddie VanHalen]

C: none of the above