We have set a work day for the course to address several issues that have been discussed recently.
Anyone wanted to help is more than welcome to come out.
As you know, the contractor will begin installation of the cement teeboxes in the upcoming weeks. This means that we need to remove the railroad ties that are currently in place. We will use them for bridges on holes 1, 3, and 9.
After we have removed them from their current location, we will need to cut the weeds that have grown up around them so a mower or weedeater will be needed.
We will also need shovels and maybe a pick-axe to dig seating for the bridges and a sledge hammer or two to secure them after we've put them in place.
We also need to dig out the holes from the teesigns on holes 4and 18 and replant the signs so we'll need water to pack them in. If that doesn't work, we'll have them cemented when the teeboxes go in.
We will inspect the welds the city put on the remaining baskets and if needed, we will add additional welds to them. We have a welder but will do the work in the parking area so as not to start a grass fire. We will have to transfer the baskets back and forth for that work to be done.
If we have time, we will look at branch trimming and or base trimming around some trees but would like to leave most of that as is.
All suggestions are welcome and help is needed if you can make it out. That's alot to do but if we get enough people out we should be able to get the majority done.
We have the July 4th Fundraiser coming up and it's turning out to be very nice as far as prizes that are coming in so hopefully our attendence will be good and we can replace those baskets and get some cement poured. And just when you thought this course couldn't get any nicer.