Show off your home dye jobs

you know what to do.

[Arthur Haverkamp]

another nice design.also like the one on the star valk.still am puzzled about how to use so many colors???

[bobd]

stage 1 on Tampa Bay Dye...

[caddrafter]

I tried to do some shading to match the original design, bit I didn't do it too well. It is going to take a lot of practice for me to get the shading down.


168 Glow Champion Eagle

and in the dark...

The shading went a little better on this one.

169 star Wraith

[Rev. Noah]

i think the shading is great... the tongue is awesome!

[caddrafter]

Thanks.

[Fritz]

Love teh HGG dye jobs.

[Fritz]

The Q-Mega is by far my favorite one I've done. I was going for a stained glass look and I achieved exactly what I wanted. The next would be the DX Roc I did a couple years ago.
DX ROC - Swirl

SJLS - GIR

Sirius Orion LF Circuit Board + Pink background

Q-Mega - Tribal Sparrow + Wind

Star Sidewinder US Flag (Used to have stars that were white, but over the years the blue bleed into the white and eventually removed the stars :(

Star Wraith - Biohazard - Dye bleed all the way through the plastic. from the top.

Star Wraith - BioHazard + Pink Background

[Rev. Noah]

how did you dye dx plastic?????

[david gipson]

That was gonna be my question nice work on the DX howd you do it?

[Fritz]

instead of using the boiling water technique with just water I used a full package of RIT with 2.5 cups of water and a 1 cap full of acetone. Right after the dye shows it's first bubble of boil, I drop the disc into the mixture then I remove from heat and float the disc for about 10 minutes.

[Billy McManus]

Well, here's my second dye job. Crucifix on a 174g TeeBird. Turned out good, except a little bleeding on the bottom edge of the rim.

[Todd " GRUNDY" Grundhoefer]

This is my first attempt at dying . How do you get the rest of the name off . I used a pro plastic and used acetone .

But not to bad for first ever disc .

What do u think of it?