Show off your home dye jobs

you know what to do.

[Jeremy Bryson]

Here's my latest! a couple little mistakes, but nothin painfully noticeable.. One of my favs. so far!

[I3ooI3oo]

These are some of my first dyes

Marvin On a Surge SS esp

Greatful Dead Seal Star Wraith

Spiral Checkerboard Champion Road Runner

[Tim]

my first two attempts

[Jeremy Bryson]

Good job for your first discs Tim! I'd suggest using a ruler or credit card and really go over all your edges before you plop it in the dye, on complicated dyes i might spend quite a while just pressing down the edges to ensure there isn't bleeding. I also try to be wary of faults in the disc itself, like depressed areas from stamps, they tend to bleed easy.

[Tim]

yea on the first one i had the dye way to hot and it soked into the vinyl, the second one was on a disc i use so its was allready beat, but most the dying i do is on disk i get and dont like so i dye them for wall hangers.

[Rev. Noah]

[Moe Dee]

my first 2 dyes 09-10-2010

[Dane Pickens]

[Jean Christyn]

And here is my today's job

.... to replace cereal bars ...;-)

[Jean Christyn]

And today's ones

[Mike McFarlin]

I just started dyeing disc for christmas presents. Here is a link to the album of My Disc Dyes

[Charles Ellis]

This is my first. Its a star katana.